Always use a channel selected by the channel scan. For lavaliers, increase the gain as desired. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Features. Turn on transmitter and change the group and channel to match the receiver (See, When the group and channel correctly match the receiver, the. Download PDF This device must accept any interference, including interference that may cause undesired operation of the device. Clip the transmitter to a belt or slide a guitar strap through the transmitter clip as shown. Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Rotate the audio gain adjustment to increase (+) or decrease (−) the gain until desired level is reached. Push channel button to select a channel in the current group. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. Do not place any open flame sources on the product. Doing so could result in personal injury and/or product failure. Includes BLX4R rack mount receiver, BLX2/SM58 handheld transmitter, microphone clip, single and dual rackmount kit, two 1/4 wave antennas, zipper bag, power supply, 2 AA batteries, and user guide. The BLX2 features two gain level settings, default and attenuated (-10 dB). A polarized plug has two blades with one wider than the other. Note: Battery characteristics may limit this range. Press group button on receiver to perform a group scan. The Shure BLX2/SM58 handheld transmitter gives you easy setup and operation and top-notch sound quality, courtesy of its integrated SM58 microphone capsule. The BLX2 is equipped with a black identification cap from the factory (dual vocal systems ship with additional gray cap). Watch. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: This device operates on a no-protection, no-interference basis. The one … Otherwise, scans from the other receivers will not detect that channel as occupied. Use manual setup to change the receiver to match the group setting of the first receiver. When locked, the display flashes rapidly if any key is pressed. (110 mm X 64 mm X 21 mm) H x W x D. 8.82 in. 5:38 Wireless Technology This video will help you understand how wireless technology works. Once the desired group is reached, release the. See Licensing Information. UHF Wireless SM8 Wireless Microphone System Frequency range: M17 (662-686 MHz), The starting point of the wireless Shure SM58, The most famous vocal microphone, Very simple setup and operation of … Related Manuals for Shure SM58. To remove batteries from the handheld transmitter, push them out through the opening in the microphone battery compartment. The audio LED on the receiver should illuminate. The BLX4 receiver is a lightweight, durable ABS polymer chassis. State of California regulation. You'll enjoy the freedom of a wireless system with the legendary quality of Shure's SM58 microphone, setting you free to roam … To remove: Remove battery cover. Connect receiver to mixer or amplifier. Note: If you want to stop the scan, push the group button again. * This equipment may be capable of operating on some frequencies not authorized in your region. An Identification Cap Kit containing assorted colored caps is available as an optional accessory. Only 7 left in stock - order soon. UNPLUG this apparatus during lightning storms or when unused for long periods of time. ④ 6.35 mm (1/4") instrument level output jack (instrument out). Ensure that receiver and transmitter are positioned within system parameters. Squeeze sides and pull off cap. L’exploitation est autorisée aux deux conditions suivantes : Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B). Reverb is a marketplace bringing together a wide-spanning community to buy, sell, and discuss all things music gear. The red LED should only illuminate infrequently when you speak loudly or play your instrument loudly. (2,530 KB), 1 - 53A8611 RACK MOUNT BRACKET, 1 - 53A8612 LONG RACK MOUNT BRACKET, 1 - 53B8443 LINK BRACKET, 1 - 90AZ8100 HARDWARE KIT, 1 - WA371 Swivel Adapter, 1 - 31B1856 Thread Adapter, 2 - 95A8699 ANTENNA/BNC,1/4 WAVE, 2 - 95A8994 ADAPTER,BULKHEAD,BNC, 1 - 95B2313 BAG VINYL, ZIPPERED. Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: +1 847-600-2000 Fax: +1 847-600-1212 (USA) Fax: +1 847-600-6446 Email: info@shure.com www.shure.com Europe, Middle East, Africa: Shure Europe GmbH Jakob-Dieffenbacher-Str. If the receiver audio LED flickers red often, set the microphone to attenuated. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. System must be set up within recommended range and receiver kept away from metallic surfaces. Sign In launch. User Guide & Specs ... BLX24R/SM58 Wireless Rack-mount Vocal System with SM58 For instruments, turn gain to minimum setting. Turn on any other equipment that could cause interference during the performance so it will be detected during the group and channel scans in the following steps. Before you begin, turn off all transmitters and turn on any equipment (other microphones or personal monitoring systems) that could cause interference during the performance. WARNING: Cancer and Reproductive Harm www.P65warnings.ca.gov open_in_new. Note: Your system comes with a combination of the following components. It has a smaller footprint than previous receivers, and features an enhanced group and channel scan. X 0.83 in. Sound level variations when switching to different sources. The Shure BLX24R/SM58 wireless system brings you a powerful handheld mic with a reliable wireless transmitter, and a rack-mountable single-channel receiver. Displays power and battery status (see Transmitter LED Indicators). The use of other cable types may degrade EMC performance. Before you begin system set up, turn all receivers ON and all transmitters OFF. L’appareil ne doit pas produire de brouillage; L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Leave the transmitter on and continue to the next system. Use with other than the specified modules and battery packs may increase the risk of fire or explosion. Features Specifications. Complete product documentation, technical support materials, software and firmware, and other tools and resources for all Shure products, in one place. Turn on the transmitter and change the group and channel to match the receiver. If sound is too faint or distorted, adjust the gain accordingly. Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio … The airborne noise of the Apparatus does not exceed 70dB (A). Manual: Push and hold group button to select a group. Note: If the selected group does not contain enough open channels, manually select group "d" when setting up larger systems. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing … Replace battery cover. Position lavalier and headworn microphones so that clothing, jewelry, or other items do not bump or rub against the microphone. Reorient or relocate the receiving antenna. ③ 4-Pin Microphone Input Jack (TA4 connector). Indicates strength of incoming audio signal: green for normal and red for overload. Replace transmitter batteries (see Changing Batteries). The MAINS plug or an appliance coupler shall remain readily operable. The BLX24R/SM58 is the least expensive Rack Mountable Shure Wireless Microphone Kit with an SM58. 2 - 95K2035 CABLE,BNC,22 in. To power off the BLX1, slide the power toggle switch to OFF. NOTE: This Radio equipment is intended for use in musical professional entertainment and similar applications. On the transmitter, set the group and channel to match the receiver. 12–15 V DC @ 235 mA (BLX88, 320 mA), supplied by external power supply (tip positive). Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage. A grounding type plug has two blades and a third grounding prong. Overview: The Shure BLX24R/SM58 Handheld Wireless Microphone System consists of the BLX4R Rack Mount Wireless Receiver, and the SM58 Handheld Microphone with the BLX2 transmitter. Shure BLX® Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Use this battery charger only with the Shure charging modules and battery packs for which it is designed. Simultaneously hold the group and channel button. WARNING: After 31 December 2014, in order to comply, this device must not be operated in the 694-820 MHz band. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies. 1. It includes the rugged BLX4R single-channel receiver with LCD display, adjustable output level, and … Leave the transmitter on and continue with the additional systems. For the BLX88, be sure to setup both transmitters before progressing to the next receiver. For further details, consult Innovation, Science and Economic Development Canada’s document Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Low-Power Radio Apparatus in the TV Bands. Before 31 December 2014, this device will comply if it is operated in the 520-820 MHz frequency band. Do not attempt to modify this product. However, if necessary, the channel can be set manually. Note: Actual range depends on RF signal absorption, reflection and interference. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability depends on the user’s classification and application, and on the selected frequency. This device complies with part 15 of the FCC Rules. Complete product documentation, technical support materials, software and firmware, and other tools and resources for all Shure products, in one place. The BLX88 locks on both sides when locked from either side. Ce dispositif fonctionne selon un régime de non‑brouillage et de non‑protection. Transmitter must be used in line of sight from receiver for optimal sound, WEEE Directive 2002/96/EC, as amended by 2008/34/EC, DD4BLX1A, DD4BLX1B, DD4BLX1C, DD4BLX1D; DD4BLX2A, DD4BLX2B, DD4BLX2C, DD4BLX2D, DD4BLX1W, DD4BLX1S, DD4BLX2W, DD4BLX2S, DD4BLX1H11, DD4BLX2H11, DD4BLX1J11, DD4BLX2J11, 616A-BLX1A, 616A-BLX1B, 616A-BLX1C, 616A-BLX1D; 616A-BLX2A, 616A-BLX2B, 616A-BLX2C, 616A-BLX2D, 616A-BLX1H11, 616A-BLX2H11, 616A-BLX1J11, 616A-BLX2J11, 616A-BLX1W, 616A-BLX1S, 616A-BLX2W, 616A-BLX2S. For more information, please visit shure.com/prop65 open_in_new. The cheaper Shure PG58 comes with a dynamic cartridge that features a … (224 mm X 53 mm) L x Dia. Meets essential requirements of the following European Directives: Note: Please follow your regional recycling scheme for batteries and electronic waste. This manual comes under the category Microphones and has been rated by 1 people with an average of a 5.5. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output. The LED indicator rapidly flashes red when locked. Adjust transmitter gain as necessary (see Adjusting Gain). USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Important: Set up each system one-at-a-time. Shure SM58 comes with an off-black color and is a little bit slimmer, while Shure PG58 comes with a darker black color and a little bit bulkier. For rechargeable batteries, solid red means the batteries are dead. Once a receiver and transmitter are tuned to the same group and channel, leave the transmitter powered on. For each additional receiver, manually set the group to match the first receiver. For a warmer sound with increased bass presence, move the microphone closer. Shure Tech Portal. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. This device operates under an ACMA class licence and must comply with all the conditions of that licence including operating frequencies.
2020 shure blx24r/sm58 manual